HONDA VT-600 Front Wheel Adapter kit Installation Instructions
download 1. Using a 6mm Allen wrench, loosen the 2 front axle pinch bolts on the right side of the lower fork leg. Loosen bolts 4 or 5 turns. 2. Using a 17mm Allen wrench, slightly loosen the front...
View ArticleHARLEY DAVIDSON REAR DEUCE WHEELS INSTALLATION MANUAL
download INSTALLATION 1. Remove existing rear wheel assembly. Save axle, axle nut, brake disc and wheel spacers for kit installation. Refer to REAR WHEEL in Service Manual. NOTES Prior to removing or...
View ArticleAJS WHEEL BEARING ADJUSTMENT
download Front Wheel (a) With the machine on the centre stand, disconnect the brake cable and remove the wheel. (b) Slacken the circular lock-nut (10). (c) Turn the adjusting sleeve (9) clockwise until...
View ArticleHARLEY DAVIDSON REAR SLOTTED SIX-SPOKE WHEELS INSTALLATION MANUAL
download INSTALLATION 1. Remove existing rear wheel assembly. Save axle, axle nut, brake disc, and wheel spacers for kit installation. Refer to REAR WHEEL in Service Manual. NOTES Prior to removing or...
View ArticleKTM Front Wheel Bearing Installation Manuals
download 1 Place motorcycle on a stand so that the front wheel is off the ground. 2 Using a 27mm socket remove the front axle nut. Using a 10mm socket, loosen the four front axle pinch bolts. Slide...
View ArticleKTM Rear Wheel Bearing Installation and REMOVAL
download 1 Insert a long punch (with a good square edge) into the center of the aluminum wheel bearing spacers and push up against the inner edge of the spacer on the opposite side of the wheel (Fig....
View ArticleHARLEY DAVIDSON VRSC CHROME WHEEL KITS INSTALLATION MANUAL
download Installation To prevent accidental vehicle start-up, which could cause death or serious injury, remove maxi-fuse before proceeding. (00251a) 1 WARNING 1 WARNING ® Kit Numbers 41279-04,...
View ArticleHARLEY DAVIDSON BLADE FRONT WHEEL KITS INSTALLATION MANUAL
download INSTALLATION 1. Remove existing front wheel assembly. Save axle, axle nut, brake disc, and wheel spacers for kit installation. Refer to FRONT WHEEL in service manual. For FLSTC and FLSTN...
View ArticleHARLEY DAVIDSON WHEEL BEARING REMOVAL AND INSTALLATION TOOL
download BEARING REMOVAL 1. Place the wheel vertically in a vise and protect the rim from being marred. NOTE See Figure 1 for the tool lubrication locations before using. 2. Assemble the remover tool....
View ArticleHARLEY DAVIDSON FRONT THUNDERSTAR WHEELS INSTALLATION
download Remove existing front wheel assembly. Save axle, axle nut, brake disc, and wheel spacers for kit installation. Refer to FRONT WHEEL in service manual. For FLSTC and FLSTN Models: Discard...
View Article
More Pages to Explore .....